暂时没空写,请看下面粗略版:
– Non-Modal Commands: G4, G10L2, G10L20, G28, G30, G28.1, G30.1, G53, G65*****, G92, G92.1
– Additional Non-Modal Commands: G10L1*, G10L10*, G10L11*
– Motion Modes: G0, G1, G2****, G3****, G5, G5.1, G38.2, G38.3, G38.4, G38.5, G80, G33*
– Canned cycles: G73, G81, G82, G83, G85, G86, G89, G98, G99
– Repetitive cycles: G76*
– Feed Rate Modes: G93, G94, G95*, G96*, G97*
– Unit Modes: G20, G21
– Scaling: G50, G51
– Lathe modes: G7*, G8*
– Distance Modes: G90, G91
– Arc IJK Distance Modes: G91.1
– Plane Select Modes: G17, G18, G19
– Tool Length Offset Modes: G43*, G43.1, G43.2*, G49
– Cutter Compensation Modes: G40
– Coordinate System Modes: G54, G55, G56, G57, G58, G59, G59.1, G59.2, G59.3
– Control Modes: G61
– Program Flow: M0, M1, M2, M30, M60
– Coolant Control: M7, M8, M9
– Spindle Control: M3, M4, M5
– Tool Change: M6* (Two modes possible: manual** – supports jogging, ATC), M61
– Switches: M48, M49, M50, M51, M53
– Input/output control***: M62, M63, M64, M65, M66, M67, M68
– Return from macro*****: M99
– Valid Non-Command Words: A*, B*, C*, D, E*, F, H*, I, J, K, L, N, P, Q*, R, S, T, U*, V*, W*, X, Y, Z
